苏州拓博TH-5807 Cable 2D Torsion Testing Machine电线2D扭转试验机

产品名称：苏州拓博TH-5807 Cable 2D Torsion Testing Machine电线2D扭转试验机

产品概述：Product Overview:

本试验机适用于TUV、VDE、UL等高柔性电缆检测要求。机台结构为水平式单工位或3工位结构，本试验机主要用于金属线材的反复扭转试验,以检测金属线材在反复扭转试验中承受塑性变形的性能和显出来的缺陷。

This test machine is suitable for TUV, VDE, UL etc and meets high flexible cable testing requirements. The structure of the machine is a parallel single station or 3-station structure, which is mainly used for repeated torsion test of metal wire to detect the performance and defects of metal wire subjected to plastic deformation in repeated torsion test.

 

本试验机主要用于质量监督行业、金属、机械行业以及电缆电线、钢丝绳等生产使用厂家.适用于直径的金属线材,配备特殊夹具,可做其他规格的反复扭转试验。

This testing machine is mainly used in the quality supervision industry, metal, machinery industry and cable and wire, wire rope and other production and manufacturers. Suitable for varied diameter metal wire, equipped with special fixtures, can be used for repeated torsion test of other specifications.

 

主要功能：Main function:

1、 PLC触摸屏显示：

    PLC touch screen display:

参数设置：机台控制相关参数；

Parameters: the machine control related parameters;

测试条件：测试速度、测试次数、测试角度方向、控制条件等；

Test conditions: test speed, test frequency, test angle direction, control conditions;

测试监控：当前设备运行状态，如电线测试时的实际次数、角度、速度、显示日期时间等；

Test monitoring: the current running status, such as cable testing actual frequency, angle, speed etc;

2、 无人监守：设备可通过监测样品的回路，自动判断样品的通断，侦测到回路断开时，可选择   暂停设备运转测试，并以声光警示，直至人工检查确认后再继续测试。

Unattended: the device can automatically determine whether the sample is off, by monitoring its circuit; it will automatically shut down, if the circuit disconnect, without staff supervision;

3、 专用夹具：根据不同线径的线缆配有相适应的夹持治具；

Special fixture: according to the cable of different diameter, it is equipped with appropriate clamping fixture;

4、 机台性能：采用昆仑通态LCD+三菱PLC+松下伺服电机，传动部件均采用原产进口产品，运行平稳，大扭力、高定位精度、长寿命使用、低噪声；

Machine performance: Kunlun tongtai LCD + Mitsubishi PLC + Panasonic servo motor, transmission components are all imported original products, smooth operation, high torque, high accuracy, long life, low noise;

5、 在线监测：点分为3组，每组6对接口，可满足18对电线同时监测，接线盘安装于各个工位样品正上方，方便接插线缆。

Monitor online:   The points are divided into 3 groups, there are 6 pairs of interfaces in every single group, which can meet the simultaneous monitoring of 18 pairs of wires. The wiring board is installed directly above each station sample to facilitate the cable connection.

6、 设备可扩展与多通道电阻监测仪的联机控制接口。

Device expandable and connect to control interface for multi-channel resistance monitors

 

技术参数：Technical Specifications:

1、 测试工位：3工位

Test station: 3-station side by side;

2、 试验方式：左端固定在转盘上、样品右端固定在可动支架上，驱动转盘进行扭转样品；

Test method: The left end is fixed on the turntable, the right end of the sample is fixed on the movable bracket, and the turntable is driven to perform the torsion sample;

3、 试样直径：Ф1.0～Ф30mm，夹持点距离：100-1000可调；

Sample diameter: 1.0-30mm, clamping point distance: 100-1000 adjustable；

4、 试样速度：0~60次/分钟可调

Test speed: 0 ~ 60 times / minute (adjustable)

5、 扭转角度：±360°数字设定

Torsion angle: ±360° digital settings

6、 荷重砝码：500g、1000g各3个

Weight: 500g、1000g each of 3 pic

7、控制方式：触摸屏控制

Control: touch screen control;

8、 计数位数：0-99999999次

Counts the number of digits: 0-99999999 times

9、 机台材质：The machine material:

主体部分：采用45#优质钢材与铝材架构；

The main part: 45 # high-quality steel structure;

动力与传动：采用进口原产工业同步带与同步轮；

Transmission: imported industrial synchronous belt and synchronous wheel;

10、 机台尺寸：W1360*D650*H1280mm

Dimension: W1360 * D650 * H1280mm

11、 电    源：220V,50 /60Hz 10A

Power supply: 220V, 50 / 60Hz 10A

搜好货厂家苏州拓博机械设备有限公司为您提供苏州拓博TH-5807 Cable 2D Torsion Testing Machine电线2D扭转试验机的详细产品价格、产品图片等产品介绍信息，您可以直接联系厂家获取苏州拓博TH-5807 Cable 2D Torsion Testing Machine电线2D扭转试验机的具体资料，联系时请说明是在搜好货网看到的。