PICOTEST 低噪音测试稳压器 测试讯号转换器 信号注入变压器 低噪音测试稳压器 Injector J2111A

14300

1-4台

14200

5-9台

14100

≥10台

起订量

≥1台

总供应

200台

所在地

江苏省苏州市

  • 图文详情
  • 产品属性
  •  

    J2111A

    1可配合通用输入型的高PSRR 低噪音稳压器(J2170A)使用

    2 20nSec典型的上升和下降时间

    3DC~40MHz可用的范围 (interconnection dependent)

    4 提供选择开关,可双极性(source or sink)操作

    5 内建偏压电流可配合网路分析仪使用

    6 具有50Ω阻抗的精密电流量输出(1V/1A)

    7 可与任意波形產生器、函数產生器和网路分析仪配合使用

    8可用来测量电池阻抗

    9 J2111A- 详细规格

    10J2112A- 详细规格

     

    J2111A - 產品说明 

    The current injector is one of the most versatile of the injector products. Coupled with the G5100A, or other equivalent function generator, it is capable of performing small signal load steps up to 40MHz, with very fast rising and falling edges. Using the G5100A, also allows the rise and fall times to be controlled, various waveforms or even arbitrary waveforms. This can be used to simulate the effects of many different types of loads, including high speed digital circuit loading, which is often largely dynamic.

     

    The current injector can also be used to measure output impedance of power supplies, voltage regulators, power buses and even batteries. It can be used to non-invasively measure the stability of a combined input filter and the negative resistance of a switching power supply. It also has application in the measurement and extraction of transistor data, including small signal current gain, Ft and many other dynamic performance parameters.

     

    In RF and instrumentation circuits it can be used to provide constant current biasing for class A amplifiers and buffers.

     

    Measuring Output Impedance

     

    The current injector has two connections for the output, Output and GND. The input is DC+AC and can be connected to either a signal generator or a network analyzer. A built in bias current enables Class A operation for use with a network analyzer. The Current Injector and DC Bias injector can also be used for this purpose.

     

    The output current is reduced 40dB from the input signal, resulting in 10mA/V scaling. The current monitor is designed to be terminated into 50 Ohms and can be used with the network analyzer, an oscilloscope or a DMM to monitor current.

     

    When used in conjunction with a voltage probe, the analyzer can measure Voltage/Current, which is the impedance.

    搜好货厂家苏州迪东电子科技有限公司为您提供PICOTEST 低噪音测试稳压器 测试讯号转换器 信号注入变压器 低噪音测试稳压器 Injector J2111A的详细产品价格、产品图片等产品介绍信息,您可以直接联系厂家获取PICOTEST 低噪音测试稳压器 测试讯号转换器 信号注入变压器 低噪音测试稳压器 Injector J2111A的具体资料,联系时请说明是在搜好货网看到的。

    品牌 : PICOTEST
    型号 : J2111A
    加工定制 :
    类型 : 信号注入变压器
    频率 : DC~45MHz
    精品推荐
    您还可以找
    搜好货网 > 苏州迪东电子科技有限公司 > PICOTEST 低噪音测试稳压器 测试讯号转换器 信号注入变压器 低噪音测试稳压器 Injector J2111A