美标眼镜架鼻梁变形测试机定制 眼镜边缘抗弯测试仪 眼镜平面抗弯测试仪

本网站价格仅为定金展示价格，具体请咨询工作人员，谢谢！

眼镜架鼻梁变形测试机定制 眼镜边缘抗弯测试仪 眼镜平面抗弯测试仪

Edge Transverse Test

Frames to be tested shall be propery glazed.For purposes of unifomity, 6base,2-mm 0.08-in) nominal-centr thickness, V-beveled plano power glass is recommended.The right eyewire of the frame to be tested shal be clamped fimly in the vertical position as wom,with the left eyewire unsupported. A spring balance shall be used to apply a downward force of22.24 Newtons(5-bf) to the endpiece area of the left eye.Pressure shall be released immediately after reaching the 22.24-Newton (5-bf)level. Upon removal of theload, no deformation shal be apparent in the frame.

Flat Transverse Test

Frames to be tested shall be properly glazed.For purposes of uniformity,6-base,2-mm (0.08-in) nominal-center thickness, V-beveled plano power glassisrecommended.The frame to be tested shall be laid on afirm, level supportwith the front lens surface downward so that one eye and one-half of the bridge project beyond the edge of the support. The frame shall be clamped frmly in position.A spring balance shall be used to apply a downward force of 4.45 Newtons(1-lbf)to the projecting endpiece area of the frame.Pressure shall be released immediately afterreaching the 4.45-Newton (1-Ibf)level.Upon removal of the load, no deformation shall be apparent in the frame

 

产品图片：

搜好货厂家天津弗洛拉自动化科技有限公司为您提供美标眼镜架鼻梁变形测试机定制 眼镜边缘抗弯测试仪 眼镜平面抗弯测试仪的详细产品价格、产品图片等产品介绍信息，您可以直接联系厂家获取美标眼镜架鼻梁变形测试机定制 眼镜边缘抗弯测试仪 眼镜平面抗弯测试仪的具体资料，联系时请说明是在搜好货网看到的。