ADMP401全向麦克风模块 MEMS麦克风/Microphone Breakout 音频模块

ADMP401全向麦克风模块 MEMS麦克风

Description

    This tiny breakout board features the ADMP401 MEMs microphone. One of the key advantages to this breakout and microphone is the bottom ported input. This means the microphone's input can fit flush against the enclosure of your project. Plus you will not have to deal with trying to solder the microphone's wacky footprint. Wootness!

    The amplifier on the breakout has a gain of 67 and more than meets the bandwidth requirements of the mic. The amplifier's AUD output will float at one half Vcc when no sound is being picked up. The amplifier produces a peak-to-peak output of about 200mV when the microphone is held at arms length and is being talked into at normal conversational volume levels. So the AUD output can easily be connected to the ADC of a micro.

Features

1. -3dB roll off at 100Hz and 15kHz

2. 1.5 to 3.3VDC supply voltage

3. Should comfortably output 40mW

SNR of -62dBA      

搜好货厂家深圳市亚泰盈科电子有限公司为您提供ADMP401全向麦克风模块 MEMS麦克风/Microphone Breakout 音频模块的详细产品价格、产品图片等产品介绍信息，您可以直接联系厂家获取ADMP401全向麦克风模块 MEMS麦克风/Microphone Breakout 音频模块的具体资料，联系时请说明是在搜好货网看到的。