粉末加热拌料机 化工加热搅拌机 油温加热ABT恩必信 AFT300R卧式搅拌机 300KG5吨可订做各种规格

产品详情

特征描述 

立式搅拌机

Vertical Mixer

特点：

Features :

占地少，容量大，耗电低，省人工，混合均化快捷

It occupies less space, has large capacity, low power consumption, labor saving and uniform mixing

自动运转计时，马达过载保护，加料限位报警（选配）

Automatic operation time, motor overload protection, feeding limit alarm (optional)

设备与原料所接触部分的材料均为不锈钢制作，清料容易不易生锈

The materials in the parts in contact with the raw materials are made of stainless steel, and the materials are easy to rust

日本NSK轴承，采用内置式或分离式安装方式，使原料或粉末与轴承分离，不易卡死，大大延长轴承使用寿命

Japan NSK Bearings, using built-in or separate installation, so that the separation of raw materials or powder and bearings, is not easy to get stuck, greatly extend bearing life

工作原理：立式搅拌机的工作原理是螺杆的快速旋转将原料从桶体底部由中心提升至顶端，再以伞状飞抛散落，回至底部，这样原料在桶内上下翻滚搅拌，短时间内即可将大量原料均化的混合完毕

Working principle : The working principle of the vertical mixer is that the rapid rotation of the screw raises the material from the bottom of the barrel from the center to the top. And then throw the material in a manner of umbrella shape to the bottom. The materials are mixed up and down in the bucket in a short time

用途：塑料片料、粉碎料、塑料粒料、塑胶新旧料及添加色母搅拌均化等用途

Use : Plastic materials, regrind, plastic pellets, plastic masterbatch mixing old and new materials are added and so on purpose

适用行业：切粒、塑胶造粒、色母制造、塑料改性、再生料回收加工、大件注塑等行业

Applicable industry : Cutting, plastic granulation, color masterbatch manufacturing, plastic modification, recycled material recycling processing, large-scale injection molding and other industries

 

立式加热搅拌机

Vertical Heating Mixer Series

特点：

Features :

搅拌干燥同步：由于物料在进行干燥过程中，持续保持流动状态。热量渗透均化。干燥时间短且不易结块。

Stirring and drying synchronization : Since the material is kept in a flowing state during the drying process, the heat is uniformly penetrated, the drying time is short, and it is not easy to agglomerate

本系列标准机型为：双层桶体设计（经济型为单层设计）内层与物料接触部分全部为不锈钢材料制造，夹层安装特殊保温材料，因而可达到安全、节能的效果

The standard models of this series are : double-drum design(economical single-layer design), the inner layer and material contact parts are all made of non-induced steel materials; the middle interlayer is equipped with special insulation materials, which can achieve safety and energy saving effect

特制高频加热器，加热快，耗电少，每顿料干燥综合成本为25-30元，（含水1%以下，PP造粒料测试，0.9元/度电费计算，使用ABT-10R型测试

Special high-frequency heater, fast heating, low power consumption, the comprehensive cost of drying each material is 25-30 yuan. (Aqueous 1% or less, PP granulation test, yuan /kwh electricity cost calculation, using ABT-10R type test)

特设双管排湿口，能有效排出湿气，收集粉尘，不污染工作环境

The special double-tube drainage port can effectively discharge moisture, collect dust, and never pollute the working environment

桶体设有入口门（选购）换色换料清理简单快捷

The barrel body is provided with an entrance door (optional), and it is quick and easy to change color and refuel

型号多，容量大，常备一次性能装载：0.5吨、1吨、1.5吨、2吨、3吨等现货供客选用

There are many models and large capacity, and one performance load is available: 0.5 tons, 1 ton, 1.5 tons, 2 tons, 3 tons, etc

干燥混合功能二合一，当不需要干燥时，只需将“加热开关”及“风机开关”关闭，本系列机型即可用于塑料搅拌均化用途，一机二用。

The dry mixing function is two-in-one, When it is not necessary to dry, just turn off the “heating swich” and “fan switch” . This series of models can be used for plastic mixing and homogenization purposes, one machine and two

 

无损重力式成品均化料仓

Non-destructive Gravity Finished Product Homogenization Silo

改性塑料行业因为原材料产地差异，生产过程中的压力，温度催化剂活性的变化等诸多因素会导致不同批次产品的相关物料物性参数会有一定差异和质量波动，这种波动会给下游用户带来不利影响。尤其一些生产色母粒的厂商，对生产出来的颗粒的批次差要求更为严格

Due to the differences in the origin of raw materials, the pressure in the production process, the change in the activity of the catalyst, and many other factors, the modified plastics industry will cause certain differences in material properties and quality fluctuations of different batcher of products. This fluctuation will bring downstream users Adverse effects, especially for manufacturers of masterbatch , require stricter batch requirements for the produced pellets.

为了消除这种质量波动和批次差，好的办法是将切粒后的多批次的产品进行掺混，多次掺混可以消除批次差，从而获得较为均衡的产品质量，传统的均化工艺除了消耗巨大的能量还会造成产品被粉碎。由此产生粉尘。还会引起静电，同时也会导到设备磨损，搅拌装置难清理的问题。

In order to eliminate this quality fluctuation and batch difference, the best way is to mix the multi-batch products after dicing, and the multiple blending can eliminate the batch difference, thus obtaining a more balanced product quality, traditional in addition to consuming huge amounts of energy, the homogenization process can cause the product to be pulverized, thereby generating dust, causing static electricity, and also causing wear of the equipment and difficulty in cleaning the stirring device.

恩必信公司自主研发的重力式均化料仓，可达到节能，几乎不消耗能量，依靠物料自身重力高质量的完成输送、掺混全过程，经广大客户试用，效果，口碑良好。是改性塑料行业成品均化的好帮手。

The gravity-type homogenization silo independently developed by the company will be energy-efficient and consume almost no energy. Relying on the material’s own gravity ad high quality to complete the whole process of transportation and blending, it has been tested by the customers, with excellent effect and good reputation it is a good helper for the finished product of the modified plastics industry.

特点：

Features :

自动掺混，能耗低

Automatic blending, low energy consumption

料仓无任何搅拌装置，管道快速卡扣链接，超大清理门，好清理，快捷方便

The silo does not have any stirring device, the pipe quick buckle link, the large cleaning door, good cleaning, quick and convenient

料仓、管道全部SUS304不锈钢材质，不会污染原料

Silos and pipes are all made of SUS304 stainless steel, which will not pollute raw materials

负压式输送，噪音低

Negative pressure transmission, low noise

PCB电脑板或PLC控制，稳定、故障率低

PCB computer board or PLC control, stable, low failure rate

 

VOC异味处理系统

VOC Odor Treatment System

VOC异味处理系统是近年来顺应环保要求为塑料行业量身定制并研发生产的，针对各种改性塑料内对人体危害严重的主要挥发性有害有机物的处理系统

Voc odor treatment system is a system that has been tailored to the plastic industry and developed in recent years to meet the requirements of the environmental protection industry. It is aimed at the treatment system of major volatile and harmful organic compounds that have serious harm to human body in various kinds of modified plastics.

VOC异味处理系统的工艺：是通过高温法，以模拟正常使情况、湿热情况共以及热带气候区域，针对塑料内含有的苯、甲苯、二甲苯、乙苯、甲醒等的处理，使挥发性有机物浓度的强度值，控制在对人体无害的范围内，主要针对汽车内饰件的塑胶原料，通过热风干燥，物料持续循环使原料受热，在达到设定温度后，将残留在原料中的VOC释放出来，以达到检测要求，常用在汽车内饰件中的仪表盘及密封条等材料（PP、PA、AS、TPV、TPU、TPR、TPE等）

The process of voc odor treatment system: through the high temperature method, to simulate normal sue, damp and hot conditions and tropical desert climate region, the treatment of benzene, toluene, xylene, ethylbenzene, styrene, formaldehyde, acrolein, etc. in plastic, and so on, to control the intensity of the concentration of volatile organic compounds in the human body. Within the scope of the damage. Mainly for the plastic materials of automotive interior parts, the raw material is heated by hot air drying and the material continues to circulate. After setting the temperature, the residual voc in the raw material is released. To requirements, materials such as dashboards and scaling strips commonly used in automotive interior parts(PP,PA,AS,TPV,TPU,TPR,TPE etc.)are commonly used.

主要配置

Main configuration

采用立式双层SUS304不锈钢保温隔热筒体，中间夹层安装隔热保温材料保温，保温效果好

Adopt vertical double layer SUS304 stainless steel thermal insulation cylinder, and heat insulation material is installed in the middle sandwich, so the insulation effect is good.

独立双区加热装置，干燥效果好，可实现连续式工作。加温部分采用可控硅电力调整器控制，节能省电

The independent double temperature zone heating device has good drying effect and can realize continuous work . the heating part is controlled by a silicon controlled electric regulator, saving energy and

输送部分采用知名品牌高压风机动力源。可实现2500KG/H的输送量，均化干燥同步，可实现自动和手动两种模式控制

Electricity. The3. Transmission part uses the well-known brand high pressure wind power source, can realize the 2500KG/H transport volume, homogenize drying synchronization, can realize automatic and manual two

控制部分采用西门子全新一代PLC编程和触摸屏控制，施耐德等知名品牌电器。界面操作人性化。操作简单快捷，功能强大

Kinds of mode control. The 4. Control part uses the SIEMENS new generation PLC programming and touch screen control, Schneider and other famous brand appliances, the interface operation is humanized, the operation is simple and fast, the function is strong. Big.

 

大型卧式加热搅拌机

Large Horizontal(Heating) Mixer

特点

Features

适合量大之塑胶粒、粉、新料、旧料之搅拌混合，混用途（单层不加热）

Suitable for large quantity of plastic pellets, flour, new material, old material of the mixing, blending purposes(single non-heating)

适合PVC，TPR，TPE，PP，PE等塑胶粒粉之搅拌、干燥（双层加热）

Suitable for PVC, TPR, TPE,PP, PE and other plastic resin powder of the mixing, drying(double heating)

双层加热高温度可达300℃

Double padded up to the maximum temperature 300℃

可选用A3板内壁或SUS304内壁

Optional A3 wall or SUS304 plate wall

采用进口名厂电控温控件（日本或台湾）

Imported famous factory electric temperature control ( japan or Taiwan)

采用进口名厂减速机或齿轮箱减速，安全、平稳、可靠

Imported famous factory reducer or reduction gear box, safe, stable and reliable

每分钟8转（可依客户要求订做之）

8 turn per minute (customized according to customer’s requirements)

可加螺旋送料机，方便人员操作

Screw feeder can be added to facilitate the operator

可依客户实际要求制作特殊及更大机型

Produce according to customer special requirements and more practical models

 

立式混色机

Vertical color mixer

特点

Features

四轮直立式设计，体积小，移动方便

配用摆线针减速电机，噪音低，持久耐用

短时间内完成均匀混料，低耗能

桶盖、桶底衡压成型、配合精确，更耐用

计时器可在0-30分钟之间选择混料时间

搅拌叶及料桶全用不锈钢制造，方便清洗

The four wheel upright design is small in size and easy to move

Equipped with cycloidal pin wheel speed reducer, low noise, durable

It can achieve uniform mixing in a short time, low energy consumption and high efficiency

The barrel cover and the bottom of the barrel are molded and matched accurately, and are more durable

The timer can select the mixing time between 0-30 minutes

Mixing leaves and barrel are all made of stainless steel for easy cleaning

 

卧式搅拌机

Horizontal mixer

特点

Features

料桶及浆叶采用不锈钢材料制造。清洗容易，避免锈蚀

料桶可倾斜100度，方便卸料

连锁安全保护装置，确保操作者及机器设备的安全

计时器可在0-30分钟之间择混料时间

The bucket and blade are made of non luring steel material, easy to clean and avoid corrosion

The barrel can be tilted 100 degrees to facilitate discharge

Chain safety protection device ensures the safety of operators and machine equipment

The timer can be selected between 0-30 minutes

 

滚筒式混合机

Rotary Mixer

特点

Features

桶体采用不锈钢材料制造，焊接牢固，表面光亮，易清洗

全方位360度旋转混合，入料、出料任意定位，操作方便

创网孔保护罩，结构合理，美观实用，确保操作安全

计时器可在0-30分钟之间选择混料时间

The barrel is made of stainless steel, with strong welding, bright surface and easy to clean

All directional 360 degree rotary mixing, feeding and discharging arbitrary location, easy to operate

First, the mesh protector is constructed with reasonable structure, beauty and practicality, and ensures the safety of operation

The timer can choose mixing time in 0-30 minutes

 

高速干燥混色机

High speed dry color mixing machine

特点

Features

集温度、时间控制于一体

方便各种参数的设定

结构合理，操作容易

不锈钢内胆、外壳，清洁方便

双层保温装置

密封式搅拌，可进行磁化杂质分离（选配）

过载保护

Set temperature and time control in one

Easy to set various parameters

The structure is reasonable and the operation is easy

The steel liner and shell are not attracted, so it is clean and convenient

Double layer thermal insulation device

Sealed agitation can be used to separate magnetized impurities

Overload protection

 

高速混合机

High Speed Mixer

主要配置

Main configuration

双速电机或变频器控制转速可调

桶体为SUS304不锈钢，易清理耐磨耗

桶盖采用凹凸式双道密封方式，密封效果好，排料阀门采用柱塞式料门堵，密封可靠无死角

电器控制系统为温时双控，欧姆龙温控表，德力西接触器性能可靠动作灵敏

搅拌叶片为SUS304不锈钢精密铸造，且通过静动平衡测试

盖子和出料口均为气动控制方便快捷

Dual speed motor or transducer can control speed

The barrel body is SUS304 stainless steel, which is easy to clean up and wear resistance

The barrel cover adopts concave-convex double-channel sealing method, and the sealing effect is good, the discharging valve adopts plunger type material door plugging, and the sealing is reliable without dead angle

Electrical control system for temperature and time double control, O

  产品图片

 

添加图片品牌介绍

 东莞市恩必信塑胶机械有限公司

Dongguan Ambition Plastic Machinery Co.,Ltd

 

  东莞市恩必信塑胶机械有限公司是塑料加工辅助设备的专业供应商，在注塑、挤出、吹塑等不同塑料加工领域拥有丰富的原料处理经验，为电子及汽车零部件、医用制品、光盘、塑料管材及板材、塑料颗粒、功能性母粒、线缆、包装等各种塑料加工行业提供专业的解决方案和高品质的设备，拥有15年行业设计、制造经验，近年来尤其在改性塑料行业崭露头角，凭借良好的口碑和专业的技术屡屡成为该行业众多的供应商，并设计制造安装了多套高端、自动化程度较高的整条生产线。我们可以提供从原料输送、计量、干燥、均化到包装乃至钢平台制作，大型料仓制作等一站式服务的整体解决方案。

 

  国际品牌，高等质量，中等价位，优质服务，先进技术，这就是恩必信产品的定位，追求，拒平庸的恩必信已经成为塑料机械辅助设备行业值得信赖的产品公司，设计先进、结构合理、节能是本公司产品的特点。产品技术和各项指针均达到国际标准，并率先成为国内该行业取得CE认证及ISO9001国际质量管理体系标准认证公司，先后多个产品获得国家专利。

 

 本公司以成为塑料成型辅机行业者身份自勉，坚持“专注细节，精益求精，内实外秀，尽善尽美”的质量方针，不断开拓创新，以质量及优质的服务深受广大客户的欢迎和信赖。公司立足于广东珠三角，以东莞这个工业重镇为基点业务迅速遍布全国，目前公司产品已经销往全国几十个大中小城市，并得到广大用户的一致好评，2008年以来公司保持了每年30%以上业绩的增长幅度，产品涵盖整个塑料成型辅助设备。

 

  多年来我们始终与客户一起思考和分享，在坚持高质量的同时尽可能的为客户降低成本，以达到高性能与低价格的均衡，在通向成功的路上，恩必信永远与您同行。

 

 

 

Dongguan Ambition Plastic Machinery Co.,Ltd. Is a  professional supplier of plastic processing auxiliary equipment, it has rich experience in raw material processing in different plastic processing fields such as injection molding, extrusion, blow molding, etc., for electronic and auto parts, medical products, and optical discs., plastic pipe and sheet, plastic pellets, functional masterbatch , cable, packaging and other plastic processing industries to provide professional solutions and high-quality equipment, with 15years of industry design, manufacturing experience, especially in recent years, especially in modification The plastics industry has emerged as a supplier of many leading companies in the industry with good reputation and professional technology, and has designed and manufactured a number on high-end, high-automatic production lines. We can provide a one-stop solution for one-stop service form raw material conveying, metering, drying, homogenization to packaging to steel platform production and large silo production.

 

International brand, high quality, medium price, excellent service, advanced technology, this is the positioning of the company, the pursuit of excellence, the rejection of mediocrity has become a reliable product company in the plastic machinery auxiliary equipment industry, advanced design, Reasonable structure, energy saving and high efficiency are the characteristics of our products, Product technology and various indicators have reached international standards, and the first to become the domestic industry to obtain CE certification and ISO9001 international quality management system standards certification company, several products have obtained national patents.

 

The company is self-proclaimed as a leader in the plastic molding auxiliary machine industry, adheres to the quality policy of“focus on detail, excellence, internal and external show, perfection”, and constantly  develops and innovates, and is well received by customers with perfect quality and excellent service. Welcome and trust. Based in the Pearl River Delta of Guangdong Province, the company has rapidly spread all over the country with Dongguan as an industrial center, At present, the company’s products have been sold to dozens of large, medium and small cities across the country, and have been well received by users. Since 2008, the company has maintained 30% per year. The increase in the above results, the product covers the entire plastic molding auxiliary equipment.

 

Over the years, we have been thinking and sharing with our customers. We insist on high quality and reduce costs for our customers as much as possible to achieve the perfect balance between high performance and low price. On the road to success, ambition will always be with you.

 

 

   

搜好货厂家东莞市恩必信塑胶机械有限公司为您提供粉末加热拌料机 化工加热搅拌机 油温加热ABT恩必信 AFT300R卧式搅拌机 300KG5吨可订做各种规格的详细产品价格、产品图片等产品介绍信息，您可以直接联系厂家获取粉末加热拌料机 化工加热搅拌机 油温加热ABT恩必信 AFT300R卧式搅拌机 300KG5吨可订做各种规格的具体资料，联系时请说明是在搜好货网看到的。