超市进出口器,超市入口门,超市入口摆门_超市进出口器

超市进出口器,超市入口门,超市入口摆门_超市进出口器

 

 

Introduction:

Dimension	diameter 168*1050mm
Stainless Steel Specification	Body: SS304
Swing arm length	600-900mm
Power Supply	AC110V±10V,60Hz / AC220V±10V,50Hz
Swing direction	single
Swing arm rotation angle	180 degree
Passing Speed	40 persons/min (normal open)30 persons/min (normal close)
Response Time	1s
Input Interface	+12V electrical signal or DC impulse signal with width >100ms
Communication Interface	RS485/relay signal
Operating Temperature	-15°C  50°C
Related Humility	<=95
Package	Paper Carton/Wooden Box

I. Scope of ApplicationA turnstile can realize blockage and access control of a public passageway. Its mechanical part includes an emergency control device. At the time of power-off, the arms at both wings will open automatically to offer an access. At the time of electrification, the arms will reset. With a variety of configurations, it is fit for all buildings and can solve all control problems at the entrance and exit.II. Features1. SUS304# 1.2mm stainless steel rainproof case NC punching, laser boring, a novel and beautiful design;2. Unique installation surface, guaranteeing simple and convenient installation of system integrator's arm control equipment;3. LINIX (the best micro-motor brand in China) brushless DC motor is used and its surface is plated with dichromate;4. Programmable turnstile control, in one or two directions (set by user);5. Pedestal is fixed by using expansion bolts.III. Introduction to the Brushless DC MotorMotor parameters:45 ZW N 24-30/60JBReduction gearbox numberOutput power: 30 stands for 30WRated voltage: 12 stands for 12VRotor magnetic material code: N stands for Nd-Fe-BProduct Name Code: Z stands for DC, W stands for brushless1. Technical parameters1.1 Structure: 304#/2.0mm in thickness, round stainless steel enclosure1.2 External dimensions:Main column diameter: 169mm1.3 Weight: 40kg1.4 Length of rotating arm: 500mm-900mm (or customized)1.5 Maximum load of rotating arm: 30kg1.6 Rotating angle of rotating arm: 180°1.7 Rotating direction: two directions1.8 Power supply: AC220 ±10V/50 ±10HZ1.9 Driving motor: brushed DC motor (12V)1.10 Input interface: dry contact signal or 12V level signal or 12V pulse signal with a pulse width 100ms; driving current 10mA1.11 Communication interface: RS485 standard; communication distance 1200m1.12 Passage speed: 40 persons/minute (constantly open); 25-30 persons/minute (constantly closed)1.13 Arm opening and closing interval: 1-2s1.14 Time needed to enter the passage state after power on: 3s1.15 Time for automatic reset in case of trouble: 10s1.16 Working environment:Indoor, outdoorTemperature: -10°C-50°CRH: 90, no condensation2. Main functions and features1) Its trouble self-inspection and warning functions make user's maintenance and use very easy;2) The equipment's running state may be programmed by the built-in small panel on the master control board;3) Mechanical structure can prevent operators from being clamped or wounded. As a rotating arm is blocked in the process of reset, the motor will stop working within the specified time. The arm will reset again (until it is reset) after defaulted time delay and the strength is small (2Kg);4) Access locking: rotating arm is locked automatically before an opening signal is received.5) Rotating arm synchronization (for double arms);6) Automatic reset: if a person fails to pass within the specified time after the turnstile is opened, the system will cancel authorization of this access automatically;7) The turnstile may be set as constantly open or constantly closed in order to meet requirements of different sites;8) Induction or time delay will reset automatically in 5 seconds (settable) after opening; and9) Rotating arms open automatically in case of power failure while they close up at the time of electrification, satisfying the fire protection requirements.

 

 

1，单门规格：750W980H，适合使用于75公分通道上（单门出售时，不包括旁边的立柱，图中旁边立柱是商家不锈钢护栏的截图）；两只为一对，可以对面使用，规格：1500W980H，适合使用于150公分通道上；

2，本司生产的出入口机的主体是直径75mm和直径25mm的不锈钢管；禁行标贴板是亚克力板；

3，本司的出入口机是机械式的，内装回位装置，人员通行时可以随着通行人员行进方向打开；反向出来时，有警示标志，顾客就不会通过了；

4，顾客通过后，无需手护回位，可以自动回位；

5，产品安装简单，只需要把底脚封盖掀起来，就可以看见定位螺丝孔，是用膨胀螺丝固定即可。

姑苏区求胜商业设备商行

 

联 系  人：田伟伟 女士 （营销部 经理） 

电      话：86 512 87699860

地      址：中国 江苏 苏州市姑苏区 人民路

企业官网：

主页：

               

 

 

 

 

搜好货厂家上海致乘机械设备有限公司为您提供超市进出口器,超市入口门,超市入口摆门_超市进出口器的详细产品价格、产品图片等产品介绍信息，您可以直接联系厂家获取超市进出口器,超市入口门,超市入口摆门_超市进出口器的具体资料，联系时请说明是在搜好货网看到的。