PICOTEST 测试讯号转换器 信号注入变压器 大功率注入器 Injector J2121A 100Hz 到1MHz

 

J2121A 大功率注入器  

1、 zui大承载400V/20A –支援军规及航舦270V大电压应用

2、 提供100Hz 到1MHz 频宽

3、 固定输出入压差700mV稳压控制

4、 提供隔离感应电流输出

5、 附低噪降温扇电源 - J2171A

6、详细规格

產品说明

While the injection transformer used for Bode plots is a very wideband transformer, it is not useful for measuring ripple rejection (PSRR) of a power supply or even an opamp. Doing so could permanently damage the transformer. This is because the attributes that make the injection transformer perform so well also result in a transformer that is intolerant of DC current. Even very small DC currents (5mA or less) can greatly reduce the signal capacity or even totally saturate the transformer. For this reason, the Picotest line injector (J2121A) is another essential test adapter for power supply testing.

 

The J2121A is especially suited to high power applications such as those associated with military and satellite busses. It can be used with input bus voltages up to 400V and supply up to 20A at 1MHz. The line injector allows the input DC supply voltage to be modulated by the network analyzer source signal (oscillator). The J2121A line injector output is DC regulated and provides a fixed voltage drop of 700mV from the input bus voltage fed into the injector in addition to the AC modulation signal.

 

The J2121A can be connected to the power supply input under test and, depending on the test probe connection points, can be used to measure either PSRR or the power supply’s input impedance. The line injector can also be used to measure the impedance/inductance of an inductor under bias.

 

While a current probe can be used as part of a test setup, the J2121A includes a current sense monitor output that can be connected to the VNA.

型号J2121A和J2120A比较  

● J2121A supports much higher voltage and current applications

● J2120A has ultra-low noise output, 50V/5安培 max 10MHz bandwidth, passive, variable

 voltage drop(1.5V-3.5V) based on the load impedance

● J2120A favors PSMR and low current, low voltage, PSRR measurement applications

● The J2121A has a much higher voltage range, much higher current rating and integrated

 Hall current monitor

● The J2121A favors high voltage, high current PSRR testing and DC/DC and Inductor

 impedance measurement

 產品内容  

● J2121A High Power Line Injector * 1 pcs

● 1 ohm Calibration Fixture * 1 pcs

● J2171A 200mA Low Noise Power Supply * 1 pcs

搜好货厂家苏州迪东电子科技有限公司为您提供PICOTEST 测试讯号转换器 信号注入变压器 大功率注入器 Injector J2121A 100Hz 到1MHz的详细产品价格、产品图片等产品介绍信息，您可以直接联系厂家获取PICOTEST 测试讯号转换器 信号注入变压器 大功率注入器 Injector J2121A 100Hz 到1MHz的具体资料，联系时请说明是在搜好货网看到的。