荣计达LH-II热空气老化试验箱

16000

起订量

≥1台

总供应

100台

所在地

上海市市辖区

  • 图文详情
  • 产品属性
  • 一、热空气老化试验箱产品简介:

    热空气老化试验箱可供工厂企业和科研单位用于分子材料、橡胶、塑料等和电气绝缘材料的热老化试验,也可用于金属材料的中温处理。

    Product introduction of hot air aging test box:

    The hot air aging test box can be used by factories and enterprises and scientific research units for the thermal aging test of molecular materials, rubber, plastics and electrical insulation materials, and can also be used for medium temperature processing of metal materials.

    二、热空气老化试验箱技术参数:★温度范围:室温+10℃~200℃;或室温+10℃~300℃;★温度波动度:±1℃★升温速率:3~5℃/min;★试验定时范围:1~9999(s、m、h)★换气时间:1~99(s、m、h)★换气量:3~10次/小时★换气方法:1、自然换气:通过箱体上下换气孔自然换气;★强行换气:风机强行进风,通过调节流量计的流量自动换气;★试样转盘及转速;10r/min两层不锈钢转架;★循环方式:风扇强制循环方式;★电源:380V 三相五线制;★环境温度:5℃~+28℃(24小时内平均温度≤28℃);★环境湿度:≤85%;★操作环境需要在室温28度以下而且通风良好;★机器放置前后左右各80公分不可放置东西;★外形尺寸;800X600X1320mm★   重量;95kg

    Technical parameters of hot air aging test box:

    ★ Temperature range: room temperature + 10 ℃ ~ 200 ℃; or room temperature + 10 ℃ ~ 300 ℃;

    ★ Temperature fluctuation: ± 1 ℃

    ★ Heating rate: 3 ~ 5 ℃ / min;

    ★ Test timing range: 1 ~ 9999 (s, m, h)

    ★ Ventilation time: 1 ~ 99 (s, m, h)

    ★ Ventilation volume: 3 ~ 10times / hour

    ★ Ventilation methods: 1. Natural ventilation: natural ventilation through the upper and lower ventilation holes of the box;

    ★ Forced ventilation: Forced ventilation of the fan, automatic ventilation by adjusting the flow of the flowmeter;

    ★ Sample turntable and speed; 10r / min two-layer stainless steel turntable;

    ★ Circulation mode: fan forced circulation mode;

    ★ Power supply: 380V three-phase five-wire system;

    ★ Ambient temperature: 5 ℃ ~ + 28 ℃ (average temperature ≤ 28 ℃ in 24 hours);

    ★ Environment humidity: ≤85%;

    ★ The operating environment needs to be below 28 ° C and well ventilated;

    ★ Don't put anything on the left and right sides of 80 cm before and after the machine is placed;

    ★ Dimensions; 800X600X1320mm

    ★ Weight; 95kg

    热空气老化试验箱产品特点:★换气式老化试验箱箱体采用数控机床加工成型,造型美观大方、新颖并采用无反作用把手,操作简便。★箱体内胆采用不锈钢(SUS304)镜面板或304B氩弧焊制作而成,箱体外胆采用A3钢板喷塑,增加了外观质感和洁净度。★换气式老化试验箱采用具有温控保护的智能化程序微电脑控制器,带定时功能,控温可靠。★大型观测视窗附照明灯保持箱内明亮,且利用钢化玻璃,随时清晰的观测箱内状况。★热风循环系统由能在高温下连续运转的风机和特殊风道组成,工作室内温度均匀。★老化箱装置配有低转速转盘。★箱体保温采用超细玻璃纤维保温棉,可避免不必要的能量损失。★箱体左侧配一个直径为50mm的测试孔,可供外接测试电源线或信号线使用。★换气的时间和次数可任意设置。Product features of hot air aging test box:

    ★ The ventilation type aging test box is made of CNC machine tools, with beautiful and elegant appearance, novel and non-reaction handle, easy to operate.

    ★ The inner tank of the box is made of stainless steel (SUS304) mirror panel or 304B argon arc welding. The outer tank of the box is sprayed with A3 steel plate, which increases the appearance and cleanliness.

    ★ The ventilation type aging test box uses an intelligent program microcomputer controller with temperature control protection, with timing function, and reliable temperature control.

    ★ Large observation window with illumination lamp keeps the inside of the box bright, and the use of tempered glass allows you to clearly observe the conditions inside the box at any time.

    ★ The hot air circulation system is composed of a fan and a special air duct that can continuously run at high temperature, and the temperature in the working room is uniform.

    ★ The aging box device is equipped with a low-speed turntable.

    ★ Using ultra-fine glass fiber insulation cotton for box insulation can avoid unnecessary energy loss.

    ★ The left side of the cabinet is equipped with a test hole with a diameter of 50mm, which can be used for external test power or signal lines.

    ★ The time and frequency of ventilation can be set arbitrarily.

    型号

    OK-HQ-100

    OK-HQ-150

    OK-HQ-225

    OK-HQ-500

    OK-HQ-800

    工作室尺寸(mm

    450*450*500

    500*600*500

    500*600*750

    700*800*900

    800*1000*1000 

    外型尺寸(mm)

    1100*830*1600

    1100*1200*750

    1250*930*1800

    1450*1100*2000

    1450*1400*2100 

    功率

    4.0(KW)

    5.0(KW)

    6.0(KW)

    6.0(KW)

    9.0(KW) 

    温度范围

    RT+10℃~200℃、300℃ 

    均匀度

    ±2℃ 

    恒温波动度

    ±0.5℃ 

    温度偏差

    ±4℃(±10℃)

    换气时间

     1min~99h可调

    换气量

    2~100次/h 

    转盘转速

    2-10r/min

    控制器

    进口LED数显P、I、D+S、S、R.微电脑集成控制器 

    精度范围

    设定精度:温度0.1℃,指示精度:温度0.1℃ 

    定时范围

    1~9999min 

    循环系统

    耐高温低噪音电机.多叶式离心风轮 

    转盘直径

    Φ250mm φ300mm φ400mm φ500mm φ700mm 

    安全保护

    漏电、短路、超温、电机过热、过电流保护

     

    搜好货厂家上海荣计达仪器科技有限公司为您提供荣计达LH-II热空气老化试验箱的详细产品价格、产品图片等产品介绍信息,您可以直接联系厂家获取荣计达LH-II热空气老化试验箱的具体资料,联系时请说明是在搜好货网看到的。

    加工定制 :
    品牌 : 荣计达
    型号 : LH-II
    规格 : 800X600X1320mm
    适用范围 : 热空气老化试验
    精品推荐
    您还可以找
    搜好货网 > 上海荣计达仪器科技有限公司 > 荣计达LH-II热空气老化试验箱