¥40
起订量
≥15公斤
总供应
18799公斤
所在地
江苏省南京市
上海斯米克铜焊丝 S229钎焊铜合金焊丝 Cu55 Ni6 Mn4斯米克焊丝上海斯米克S229铜焊丝 Cu55 Ni6 Mn4钎焊铜合金焊丝1.氩弧焊时建议用大流量、低流速的气流,以保证焊接熔池得到良好的保护。 2.薄板采用I型坡口;较厚的板采用V型或X型坡口,需加衬垫。 3.好采用平焊位置焊接。在有脉冲电弧焊设备和焊工操作技术良好的情况下,也可进行其他位置焊接。 4.不推荐把这种焊丝用于气焊,因为在焊接熔池中会有铝的氧化物存在,影响焊缝质量。 5.将焊接部位的锈层、湿气、油污、灰尘等确实除净。铜及铜合金焊丝的用途有三种: 首先是焊接铜及铜合金, 用于铜及 铜合金连接; 其次由于具有良好的耐蚀性和耐磨性, 常用于堆焊耐金属 间摩擦的部件(如轴瓦、 低压阀门密封面) 和耐海水腐蚀工件(如螺旋 桨) 等; 此外, 更广泛的是用于钎焊钢、 硬质合金工具等。 铜及铜合金焊丝可用熔化极氩弧焊(MIG焊) 、 钨极氩弧焊(TIG 焊) 、 气焊及等离子弧焊等方法施焊。 钨极氩弧焊(TIG焊) 通常采用直流正接方法, 熔化极氩弧焊(MIG 焊) 通常采用直流反接方法。
Copper alloys
铜
合
金 | S 201 | Sn1 Si0.3Mn0.3 Cu Rem. | Good mechanical properties and crack resistance. Gas welding and argon arc welding of red copper. 机械性能好,抗裂性好。紫铜气焊及氩弧焊用 | ERCu |
S 211 | Si3 Mn1 Cu Rem. | Good mechanical properties. Argon arc welding of copper alloys and MIG brazing of steel. 机械性能好,铜合金氩弧焊及钢的MIG钎焊用 | ERCuSi-Al | |
S 212 | Sn5 Cu Rem. | Wear resistance. Argon arc welding of copper alloys and surfacing of steel. 耐磨性好。铜合金氩弧焊及钢的堆焊用 | ERCuSn-A | |
S 213 | Sn8 Cu Rem. | Wear resistance. Argon arc welding of copper alloys and surfacing of steel. 耐磨性好。铜合金氩弧焊及钢的堆焊用 | ERCuSn-C | |
S 214 | Al7.5 Cu Rem. | Wear and corrosion resistance. Argon arc welding of copper alloys and surfacing of steel. 耐磨、耐蚀。铜合金氩弧焊及钢的堆焊用 | ERCuAl-A1 | |
S 215 | Al9 Cu Rem. | Wear and corrosion resistance. Argon arc welding of copper alloys and surfacing of steel. 耐磨、耐蚀。铜合金氩弧焊及钢的堆焊用 | ERCuAl-A2 | |
S 221 | Cu60 Sn1 Si0.3 Zn Rem. | Melting point is about 890℃. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron. 熔点约890℃。黄铜气焊及碳弧焊用,也可钎焊铜、钢、铸铁 | ||
S 221F | Cu60 Sn1 Si 0.3 Zn Rem. | S221 welding rod coated with flux. 外涂焊剂的S221焊丝 | ||
S 222 | Cu58Sn0.9Si0.1 Fe0.8 Zn Rem. | Melting point is about 880℃. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron. 熔点约880℃。黄铜气焊及碳弧焊用,也可钎焊铜、钢、铸铁 | RBCuZn-C | |
S 222F | Cu58Sn0.9Si0.1 Fe0.8 Zn Rem. | S222 welding rod coated with flux. 外涂焊剂的S222焊丝 | RBCuZn-C | |
S 223 | Cu59 Sn0.6 Zn Rem. | Melting point is about 900℃. Braze welding of copper, steel and cast iron. 熔点约900℃。铜、钢、铸铁钎焊用 | RBCuZn-A | |
S 224 | Cu62 Si0.5 Zn Rem. | Melting point is about 905℃. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron. 熔点约905℃。黄铜气焊及碳弧焊用,也可钎焊铜、钢、铸铁 | ||
Copper alloys 铜
合
金 | S 225 | Cu48 Ni10 Zn Rem. | Melting point is about 935℃ and high strength. Braze welding of steel, nickel and carbide alloys. 熔点约935℃。高强度,钎焊钢、镍及硬质合金用 | RBCuZn-D |
S 225F | Cu48 Ni10 Zn Rem. | S225 welding rod coated with flux. 外涂焊剂的S225焊丝 | RBCuZn-D | |
S 226 | Cu60 Sn0.3 Si0.2 Zn Rem. | Melting point is about 900℃. Gas welding of brass, also braze welding of copper, steel and cast iron. 熔点约900℃。黄铜气焊用,也可钎焊铜、钢、铸铁 | ||
S 227 | Cu58Sn0.9Ni0.5 Si0.1 Fe0.8 Zn Rem. | Melting point is about 880℃. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron. 熔点880℃。黄铜气焊及碳弧焊用,也可钎焊铜、钢、铸铁 | RBCuZn-B | |
S 229 | Cu55 Ni6 Mn4 Zn余 | Melting point is about 920℃, high strength. Braze welding of steel, nickel and hard carbide. 熔点约920℃。高强度,钎焊钢、镍及硬质合金用 | ||
Aluminum alloys
铝
合
金 | S 301 | Al≥99.5 | Good ductility and corrosion resistance. Gas welding and argon arc welding of pure aluminum. 塑性好、耐蚀。纯铝气焊、氩弧焊用 | ER1100 |
S 311 | Si5 Al Rem. | Corrosion resistance, wide range of usage. Gas welding and argon arc welding of aluminum alloys other than high magnesium alloys. 抗裂性好,通用性大。铝合金气焊、氩弧焊用。不宜用高镁合金 | ER4043 | |
S 321 | Mn1.3 Al Rem. | Good corrosion resistance, weldability and ductility. Gas welding and argon arc welding of aluminum alloys. 良好的耐蚀性、可焊性及塑性。铝合金气焊、氩弧焊用 | ||
S 331 | Mg5 Mn0.4 Al Rem. | Corrosion resistance and high strength. Argon arc welding of aluminum alloys. 耐蚀,强度高。铝合金氩弧焊用 | ER5183 |
搜好货厂家南京弘昇焊接材料有限公司为您提供上海斯米克S229铜焊丝 Cu55 Ni6 Mn4斯米克钎焊铜合金焊丝的详细产品价格、产品图片等产品介绍信息,您可以直接联系厂家获取上海斯米克S229铜焊丝 Cu55 Ni6 Mn4斯米克钎焊铜合金焊丝的具体资料,联系时请说明是在搜好货网看到的。
品牌 : | 进口 |
型号 : | INCONEL 82 |
焊丝直径 : | 1.0/1.2/1.6/2.0/2.4 |
类型 : | 药芯 |
材质 : | 碳化钨 |
牌号 : | ERNiCr-3 |
产地 : | 进口 |
加工定制 : | 否 |
熔点 : | 573/625 |
长度 : | 1000 |
重量 : | 3000 |
用途 : | 铁路机车,化工、食品等行业 |
工作温度 : | 600 |
焊接电流 : | 150-180 |
适用范围 : | 铝及铝合金 |
联 系 人
联系电话
采购说明