压顶缠绕机 自动拉伸缠绕包装机 高速自动线缠膜机 LT1650BT 亿鑫纸箱设备

15999

起订量

≥1台

总供应

100台

所在地

河北省沧州市

  • 图文详情
  • 产品属性
  •                                 自动拉伸膜缠绕包装机

       Model 型号:LT1650BT-L 人机界面显示屏【出口型】 

    •Heavy steel Structure 钢制桅杆,坚固耐用

     •Heavy turntable 钢制旋转转盘,承重力强 

    •Turntable Max load weight 2000kg 转盘极大承重2000kg

     •Turntable diameter1650mm,转盘直径1650mm 

    •Max load height 2000mm 可检测高度较高2000mm 

    •Automatic height sensing via photocell 自动侦测托盘物料的高度 

    •Carriage up/down movement controlled by dedicated for film overlapping parameters setting from control panel 膜架升降速度可调,以控制膜的重叠比例 

    •Automatic pre-tension,Fast film installation. 自动预拉伸机头,快速穿膜机构

     •Electricity protect class IP54 保护等级IP54 •EURO CE 欧洲CE 认证 

    2.Panel 操作面板控制 

    •Variable turntable speed 4 -12 rpm (frequency controll) 转盘速度可调4-12 转/分钟(变频控制)

     •Machine Carriage speed 1.4-4 mt/min (frequency controll) 膜架升降速度可调1.4-4 米/分钟(变频控制) •Variable adjustable number of wrappings top and bottom. 顶和底部缠绕包装圈数可设定

     •MANUAL CARRIAGE “UP” and “dn”. 手动操作膜架升降

     • MANUAL CYCLE 手动操作模式 

    •Photocell sensing delay Ecoplat Base 光电顶部延迟

     • Power Switch 开关电源 

    •Safety stop button, Pneumatic button 急停按钮,启动按钮 

    •Chinese and English switching 中英文切换 

    4.DESCRIPTION 技术描述 

    4.1 Rear and front forklift portability 前后均有叉车槽口

     4.2 采用链条结构,膜架上升、下降速度分别可调,送膜速度可调 (立柱采用冷轧钢板,厚度完全符合国家标准,坚固耐用。导轨采用 IPEX 先进技术,U 型导轨;具有双向定位、噪音 小,膜架上升下降平稳性可靠耐用,特别针对超高货物的包装。)

     4.3 变频动力预拉伸经济型膜架,随动感应杆控制送膜电机出膜,一拉即可;

     4.4 Base with nylon rollers on bearings that guarantee a precise rotation and a low level of noise. Turntable height only 77mm 轴承尼龙轮运转平稳、噪音低,高度只有77mm 

    4.5 Steel structure with carriage Wheel guides along the entire Length.膜架滑动槽由高强度刚制。

    4.6 High structural rigidity, made  With an internal ribbing.高强度 构设计,

     4.7 Rounded corners resulting From careful work during the Design phase.圆弧型设

    4.8 Internal structure of the post Wheel guides along the entire reinforced  that reduce the number of welds Post is completely painted,even  internally,to avoid rust 内部的结,钢板的折弯有效的减少焊接 的内部机构设计 甚至在狭小的内部的材料都做了表面 处理,防止生锈。

    1. One year warranty 主机质保期期壹年,免费服务除买方人为损坏原因或自然灾害;

      2. Exceeds warranty period, service part still responsible for the maintenance, but the buyer is required to charge reasonable maintenance costs.质保期满后,提供长期跟踪服务,卖方提供有偿服务;

      3. 7days 24 hours hotonline.7 天24 小时热线服务;

      4. Service and spare parts center in 售后服务和备件管理中心;

      5. If technological upgrade of the buyer and seller to confirm the agreement, the buyer will be provided

    2. 八、质保期:

    3. 设备整机保修年,保修期内由设计或零件质量问题供方负责给予维修更换,由操作不当,或天气自然灾害导致机器故障所有费用由需方负责。

    4.  

    5.  

    6.              感谢您对高速全自动纸箱生产线的关注

    7. 您的要求是对我们很大的支持

    8.         您的选择是对我们很大的激励

    搜好货厂家东光县亿鑫纸箱设备制造有限公司为您提供压顶缠绕机 自动拉伸缠绕包装机 高速自动线缠膜机 LT1650BT 亿鑫纸箱设备的详细产品价格、产品图片等产品介绍信息,您可以直接联系厂家获取压顶缠绕机 自动拉伸缠绕包装机 高速自动线缠膜机 LT1650BT 亿鑫纸箱设备的具体资料,联系时请说明是在搜好货网看到的。

    加工定制 :
    品牌 : 亿鑫
    型号 : -LT1650BT
    外形尺寸 : -2200mm*500mm
    产品别名 : 全自动缠绕机
    成品尺寸 : -2200mm*500mm
    用途 : 印刷设备
    包装类型 :
    适用对象 : 奶茶,酸奶,鲜奶,果汁饮料,碳酸饮料,烟,其他
    适用行业 : 餐饮,食品,玩具,烟酒,医药,礼品、工艺品,其他
    售后服务 : 一年保修
    订货号 : -1650
    货号 : -1650
    是否跨境货源 :
    精品推荐
    您还可以找
    搜好货网 > 东光县亿鑫纸箱设备制造有限公司 > 压顶缠绕机 自动拉伸缠绕包装机 高速自动线缠膜机 LT1650BT 亿鑫纸箱设备