￥33
25-999千克
￥32
1000-4999千克
￥31.80
≥5000千克
起订量
≥25千克
总供应
5000千克
所在地
广东省东莞市
Lexan PC 3413R物性
| General Information | |
| Product Description | |
30% GR, 改良的机械性能， UL94 V-1 － 0.058"。内含脱模剂 | |
| General | |
| Material Status |
|
| Availability |
|
| Additive |
|
| Features | Medium FlowEthylene Oxide SterilizableSteam SterilizableRadiation SterilizableBiocompatibleE-beam Sterilizable |
| Uses | Medical/Healthcare ApplicationsPharmaceuticals |
| Agency Ratings | ISO 10993USP Class VI |
| Forms |
|
| Processing Method |
|
| ASTM and ISO Properties 1 | |||
| Physical | Nominal Value | Unit | Test Method |
| Specific Gravity | 1.19 | ASTM D792 | |
| Density | 1.19 | g/cm3 | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (300°C/1.2 kg) | 11 | g/10 min | ASTM D1238 |
| Melt Volume-Flow Rate (MVR) (300°C/1.2 kg) | 0.610 | in3/10min | ISO 1133 |
| Molding Shrinkage - Flow | ASTM D955 | ||
-- | 0.0050 to 0.0070 | in/in | |
0.126 in | 0.0050 to 0.0070 | in/in | |
| Molding Shrinkage - Across Flow (0.126 in) | 0.0050 to 0.0070 | in/in | ASTM D955 |
| Water Absorption (24 hr) | 0.14 | % | ASTM D570 |
| Water Absorption (Saturation, 73°F) | 0.26 | % | ISO 62 |
| Water Absorption (Equilibrium, 73°F, 50% RH) | 0.10 | % | ISO 62 |
| Mechanical | Nominal Value | Unit | Test Method |
| Tensile Modulus 2 | 334000 | psi | ASTM D638 |
| Tensile Modulus | 347000 | psi | ISO 527-2/1 |
| Tensile Strength 3 (Yield) | 8990 | psi | ASTM D638 |
| Tensile Stress (Yield) | 8850 | psi | ISO 527-2/50 |
| Tensile Strength 3 (Break) | 10700 | psi | ASTM D638 |
| Tensile Stress (Break) | 10600 | psi | ISO 527-2/50 |
| Tensile Elongation 3 (Yield) | 6.5 | % | ASTM D638 |
| Tensile Strain (Yield) | 6.0 | % | ISO 527-2/50 |
| Tensile Elongation 3 (Break) | 140 | % | ASTM D638 |
| Tensile Strain (Break) | 130 | % | ISO 527-2/50 |
| Flexural Modulus 4 (1.97 in Span) | 348000 | psi | ASTM D790 |
| Flexural Modulus 5 | 326000 | psi | ISO 178 |
| Flexural Strength 5, 6 | 13500 | psi | ISO 178 |
| Flexural Strength 4 (Yield, 1.97 in Span) | 14500 | psi | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
| Charpy Notched Impact Strength | |||
73°F | 39.0 | ft·lb/in2 | ISO 179/2C |
73°F 7 | 33.3 | ft·lb/in2 | ISO 179/1eA |
-22°F 7 | 7.14 | ft·lb/in2 | ISO 179/1eA |
| Charpy Unnotched Impact Strength 7 | ISO 179/1eU | ||
-22°F | No Break | ||
73°F | No Break | ||
| Notched Izod Impact | ASTM D256 | ||
-22°F | 4.12 | ft·lb/in | |
73°F | 15.7 | ft·lb/in | |
| Notched Izod Impact Strength 8 | ISO 180/1A | ||
73°F | 33.3 | ft·lb/in2 | |
-22°F | 4.76 | ft·lb/in2 | |
| Unnotched Izod Impact Strength 8 | ISO 180/1U | ||
-22°F | No Break | ||
73°F | No Break | ||
| Instrumented Dart Impact (73°F, Total Energy) | 779 | in·lb | ASTM D3763 |
| Thermal | Nominal Value | Unit | Test Method |
| Deflection Temperature Under Load (66 psi, Unannealed, 0.252 in) | 280 | °F | ASTM D648 |
| Deflection Temperature Under Load | ASTM D648 | ||
264 psi, Unannealed, 0.252 in | 270 | °F | |
264 psi, Unannealed, 0.126 in | 259 | °F | |
| Heat Deflection Temperature 9 (264 psi, Unannealed, 3.94 in Span) | 261 | °F | ISO 75-2/Ae |
| Vicat Softening Temperature | 289 | °F | ASTM D1525 10 |
| Vicat Softening Temperature | |||
-- | 289 | °F | ISO 306/B 50 |
-- | 293 | °F | ISO 306/B120 |
| CLTE - Flow (-40 to 104°F) | 0.000043 | in/in/°F | ASTM E831 |
| CLTE - Flow (-40 to 104°F) | 0.000043 | in/in/°F | ISO 11359-2 |
| CLTE - Transverse (-40 to 104°F) | 0.000042 | in/in/°F | ASTM E831 |
| CLTE - Transverse (-40 to 104°F) | 0.000042 | in/in/°F | ISO 11359-2 |
| Ball Pressure Test (257°F) | Pass | IEC 60695-10-2 | |
| Processing Information | |||
| Injection | Nominal Value | Unit | |
| Drying Temperature | 248 | °F | |
| Drying Time | 2.0 to 4.0 | hr | |
| Suggested Max Moisture | 0.020 | % | |
| Hopper Temperature | 140 to 176 | °F | |
| Rear Temperature | 500 to 536 | °F | |
| Middle Temperature | 518 to 554 | °F | |
| Front Temperature | 536 to 590 | °F | |
| Nozzle Temperature | 518 to 554 | °F | |
| Processing (Melt) Temp | 536 to 590 | °F | |
| Mold Temperature | 176 to 230 | °F | |
搜好货厂家东莞市胜浩塑胶原料有限公司为您提供PC Lexan 3413R-739 沙伯基础 防弹胶 内含脱模剂 易脱模PC的详细产品价格、产品图片等产品介绍信息，您可以直接联系厂家获取PC Lexan 3413R-739 沙伯基础 防弹胶 内含脱模剂 易脱模PC的具体资料，联系时请说明是在搜好货网看到的。
| 牌号 : | 3413R |
| 加工级别 : | 注塑级 |
| 特性级别 : | 标准级 |
| 用途级别 : | 通用级 |
| 品牌 : | 沙伯基础 |
| 包装 : | 25KG/包 |
联 系 人
联系电话
采购说明